With Cerebrum powered on and presumably in an idle state, it is good practice to put Cerebrum’s instinct system to the test. Every base model comes equipped with a collection of integrated sensors to help prevent hazards to the best of its ability. These sensors detect the motion, angle, temperature, and proximity to objects.
Without the use of any commands or external tools, you may be able to test some basic reflexes of your attached Mobility Augment(s) by pushing around your robot. If it is light enough and deemed safe (according to the attached augments), you could try picking it up too. While your robot won’t feel offended by abuse, it isn’t going to be flawless at maintaining composure, so you don’t want to get too rough.
If you manage to trigger a reaction, you should notice the status indicator will illuminate yellow, signifying that your robot is in Recovery Mode. When in Recovery Mode, you robot will ignore any commands in an attempt to orient itself into a comfortable situation. If you have manually assembled your robot, it may force itself in Recovery Mode until you have calibrated your Mobility Augment(s). You may also need to calibrate them if you are encountering sensitivity problems.
If you push your robot to it’s limits, the status indicator will turn red, signifying Failure Mode. In this state, Cerebrum has given up attempting to recover and needs manual intervention. Failure Mode may also trigger if the power level is too low.
Not all Mobility Augments take advantage of Cerebrum’s sensory data, and it is recommended you test the data using the Karyon Interface before attempting serious operation of your robot.
If you are encountering problems with sensors, please refer to the Cerebrum Troubleshooter.
Once you’ve completed this step, please proceed to the next step, Using Augments.